建筑结构

2009, v.39(S2) 72-73

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Past Issue) | 高级检索(Advanced Search)

一字型剪力墙的设计思考
Thinking to the shear-wall without flange

刘惠振;张宇红;
Liu Huizhen,Zhang Yuhong (China Beijing Architectural Design & Research Institute.Building Division·ShenYang,ShenYang 110034,China)

摘要(Abstract):

高层住宅中出现了翼缘长度不足的剪力墙和一字型剪力墙,本文从满足墙体稳定时的容许承载力设计值及其轴压比入手,提出了通过在墙体两端设置型钢进而提高剪力墙延性的设计思路。
This article begins with the analysis on the design-value of allowable bearing-capacity and axial compression ration of the shear-wall,and presents the designing method about improving the ductility of the shear-wall by setting the steel-reinforced in the both ends of the shear-wall.

关键词(KeyWords): 墙体延性;钢骨混凝土剪力墙
ductility;shear-wall with steel-reinforced

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 刘惠振;张宇红;
Liu Huizhen,Zhang Yuhong (China Beijing Architectural Design & Research Institute.Building Division·ShenYang,ShenYang 110034,China)

Email:

DOI: 10.19701/j.jzjg.2009.s2.022

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享